This used Gloshine P3.91 indoor LED screen is built from LS3.9TL die-cast cabinets produced in August 2020, confirmed by the moulded cabinet serial S02008012. At 500 × 500 mm and only 6.5 kg per panel, it is a lightweight indoor rental workhorse: one person can hang, stack or strike a cabinet in seconds using the integrated quick locks, handles and locating pins, and ten cabinets travel in a single flight case for efficient trucking between shows.
The 3.91 mm pixel pitch remains the most popular indoor rental pitch worldwide — crisp for corporate stages, conference backdrops, church walls and broadcast sets at viewing distances from four metres, while keeping cost per square metre low. Each cabinet draws a maximum of 150 W at AC 200–240 V, 47–63 Hz, with rear-mounted power and data in/out on sealed connectors, so walls can be powered and signalled in a clean daisy chain without external boxes.
Inside the hub, the panels run NovaStar MRV210 receiving cards (Gloshine part code GSN210), giving full compatibility with NovaStar sending cards and processors and easy access to spares. The photos show the hub cover, card, power supply and harness in place, along with intact locks, curve-ready pins and clean module surfaces with no dead-pixel clusters visible in the test patterns.
Stock is sold per flight case of ten cabinets (2.5 m² per case), so buyers can scale from a single backdrop to a full stage wall in 2.5 m² increments while keeping one matched production batch for uniform colour and brightness. A sensible choice for rental companies and integrators who want proven indoor inventory without new-equipment lead times or pricing. Serial list, case count and powered test footage available on request.
