Customer question: Can I install a used outdoor display in a new location using the old cabinet arrangement?
English explanation
The old cabinet arrangement is a reference, not an automatic approval for the new site. Review the cabinet condition, sealing, gaskets, doors, connectors, corrosion, drainage and rear ventilation. Ask whether the cabinets were previously exposed to rain, salt air, dust, snow or direct sunlight. Water marks or corrosion can remain hidden while the LEDs still work. The new site requires an independent structure and environment review. Confirm foundations, anchors, wind load, screen orientation, maintenance access, drainage, cable penetrations, distribution protection, grounding and surge protection with qualified local professionals. An IP rating applies to the approved product and test conditions; it does not approve a building opening, support steel or cable route. Test brightness at daytime, dusk and night if the project requires all three. Check temperature and airflow after a realistic operating period. Outdoor high-brightness content can create significant heat and power demand. Protect connectors, keep cables from standing water and label every power and signal zone. Before handover, document weatherproofing limits, cleaning, seal inspection and the emergency shutdown process. If the used cabinet cannot meet the site conditions, record the limitation and do not describe the installation as fully weatherproof without evidence.
Service boundary
Structural, lightning, electrical and weatherproofing approval must come from qualified local professionals. —
